You'll be making a massive improvement in the handling and driveability of your 2017 Thor Vegas motorhome if you install everything you mentioned. If you want the MH to be much easier to drive in basically all conditions what you listed is going to take care of you very well. Everything you mentioned is the correct fit too.
SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-106-54-1
SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47
Roadmaster Rear Anti-Sway Bar... view full answer...
No, there is not a clip that would have fallen off. The Solera fabrics have a channel that slides into the roller bars to secure the fabric in place. I have included a video from the Solera 10' Replacement Awning Fabric # LCV000334335 that goes over the installation of Solera awning fabric and shows what holds it in place. That part begins around the 6:20 mark of the video. view full answer...
In regards to the SumoSprings Solo Custom Helper Springs part # SSR-130-47, the amount of contact or engagement will vary by application and we unfortunately cannot inform of this for any one particular application since there are so many variables. That said, typically for the cab and chassis model springs you'll want them to engage just slightly with the weight vehicle. If you have a gap you can fill this with the included spacer until you make contact with the axle. That said, it's okay... view full answer...
The Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black # LA-401BA is completely universal and comes in black. This will replace your current ladder on your 2017 Thor Vegas Motorhome. view full answer...
If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space!
You should verify that the vehicle's roof can handl that weight too though. view full answer...
I have attached a list of all the sewer fittings we offer from LaSalle Bristol for you. I was not able to identify the specific fitting you inquired about but if you can send me a photo, I will try to see if we have the proper replacement for you. view full answer...
I have two solutions for you depending on your preferences.
We have the Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black # LA-401BA or the Surco Universal Exterior RV Ladder - 84-1/2" Long # SP502L. view full answer...
The best suspension enhancement option to reduce bouncing on a 2015 Thor Vegas 24.1 Motorhome is by far the SumoSprings Custom Helper Springs part # SSR-106-47-1 for the rear and part # SSF-106-47 for the front. The springs provide a cushion between the suspension and frame to help better absorb road shock so you don't get that bouncing feeling.
The springs are one of the most popular upgrades for a motorhome so I know you will be happy with them. There will be a noticeable difference... view full answer...
Yes, the 96" Solera Awning Rail Extrusion # LC715217 for Black or # LC715216 for White has mounting holes that are spaced apart by 6" which you can compare to what you currently have. view full answer...
I checked with Roadmaster and the correct rear sway bar for your 2018 Thor Vegas 25.2 is the part # RM-1139-147 since it was built on a Ford E-450 Class A chassis. The part number you mentioned does not fit. view full answer...
I wouldn't be able to comment on the frame strength but we do have trailer hitch options which can handle the tongue weight load you are looking carry. The best option we have for this would be the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 which is rated at 1,600 lbs tongue weight. It will need to be either welded or drilled and bolted onto the frame. view full answer...
For your 2019 Thor Vegas 27.7, which was built on a Ford E-450 chassis, the SumoSprings I recommend are:
- Front Axle: SumoSprings Solo Custom Helper Springs # SSF-106-47
- Rear Axle: SumoSprings Solo Custom Helper Springs # SSR-130-54
These SumoSprings will fit and do a perfect job of giving you a more comfortable and controlled ride because they reduce sway while helping keeping your motorhome level. The SumoSprings are made of a microcellular urethane which compress based on the amount... view full answer...
For your 2018 Thor Vegas 25.5 Motorhome, which as you mentioned is built on the Ford E-450 chassis, I highly recommend the SumoSprings Solo Custom Helper Springs # SSF-106-47 for the front axle and # SSR-130-54 for the rear axle. The 1,000 pound capacity on the front springs and the 2,800 pound weight capacity on the rear springs provide the perfect amount of support for this size RV and will do a really nice job of smoothing out your ride and reducing sway during travel.
I have attached... view full answer...
From the information available to me your 2022 Thor Vegas Motorhome is built on the Ford E-Series chassis with either a V-10 or 7.3L V-8 engine. The correct Roadmaster Rear Anti-Sway Bar, is # RM-1139-147 when using the fitguide by chassis and engine RV type. The recommended front Anti-Sway Bar is, # RM-1139-176. view full answer...
The best suspension enhancement option we offer for a 2016 Thor Vegas 25.3 is from SuperSprings, the SumoSprings in particular part # SSR-106-47-1 for the rear and part # SSF-106-47 for the front. These are a favorite of ours as well as our neighbors. They are very popular in the RV industry due to their ability to provide support without compromising ride quality. The Timbrens you mentioned also offer support but have yet to really figure out the ride quality part as they tend to have... view full answer...
You likely have something like the 15' Long x 5/8" Tall Rubber Bulb Seal for RV Compartment Doors # SR32FR, but you'll need to confirm the dimensions of your current seal so we can make sure these will match.
If this doesn't match what you have then I've added our selection for you to filter through or if you let me know what your seal measures I'd be happy to see what we have that might match! view full answer...
The Wiper Technologies J Hook Windshield Wiper Blade item # WPR96FR have a J Hook mounting connector that has been used on prior models of the Thor Vegas motorhome. We do not have any information on the new 2023 model and I checked with our vendors and nothing has been confirmed either.
I have linked a review video below that shows this wiper being installed. You should be able to compare your current connector to the one in the video to confirm that they are compatible. view full answer...
TPMS system like the TireMinder i10 TPMS for RVs and Trailers # TM29FR are designed to be used with the included signal booster. This ensures the greatest accuracy and reliability when it comes to the readings from the sensors.
The repeater extends the signal and also improves the signal strength to cut through signal interference that comes from surrounding automobiles. According to the manufacturer, the signal booster should be installed on any system that includes it.
I have attached... view full answer...
There is no video for a 2020 Thor Vegas 24.1; for your other question you said rear stabilizer so I'm not sure if you meant steering stabilizer or rear anti-sway bar, and there is drilling for the Roadmaster Rear Anti-Sway Bar # RM-1139-117, but no drilling is required to install the Roadmaster Exact Center Steering Stabilizer # RM47MR.
I have added a cut out from the directions that show where the drilling is needed for the Roadmaster Rear Anti-Sway Bar # RM-1139-117. view full answer...
The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA can utilize the same mounting points as your existing ladder on your 2015 Thor Vegas. This ladder is a universal fit, so you can adapt the stand off locations to fit your motorhome. I've attached a photo of dimensions to further assist. view full answer...